ECTS credits ECTS credits: 4.5
ECTS Hours Rules/Memories Student's work ECTS: 74.2 Hours of tutorials: 2.25 Expository Class: 18 Interactive Classroom: 18 Total: 112.45
Use languages Spanish, Galician
Type: Ordinary Degree Subject RD 1393/2007 - 822/2021
Departments: Electronics and Computing
Areas: Electronics
Center Faculty of Physics
Call: Second Semester
Teaching: With teaching
Enrolment: Enrollable
Study and characterization of semiconductor devices and their physical foundations. We will focus on diodes, bipolar transistors and field effect transistors. Different models for these devices will be presented.
Learning outcomes, the student will demonstrate:
- Who knows the operating principles of current electronic devices and the circuit models associated with these devices.
- That it is capable of studying and characterizing semiconductor devices and their physical foundations.
Scenario 2 and / or 3
Without changes
INTRODUCTION TO SEMICONDUCTORS. Properties two semiconductors. Intrinsic and extrinsic semiconductors.
PHYSICS OF SEMICONDUCTORS. BANDS OF ENERGY. Carrier concentration in thermal equilibrium and out of balance. Calculation of the distribution of carriers. Concentrations based on energy. Concentration in doped function. Dependence with temperature. Fermi level.
TRANSPORTATION PHENOMENA IN SEMICONDUCTORS. Drag currents Broadcast currents. Final expressions of the current. Mechanisms of generation-recombination. Continuity equations.
THE UNION PN. Structure of the union. Static union PN: Qualitative analysis. Emptying approach. Gradual union. Electrokinetic problem of PN junction: Qualitative analysis. The equation of the ideal diode. Deviations from the ideal union. Admittance of the union
THE BIPOLAR UNION TRANSISTOR. Structure of the bipolar. Introduction to the operating modes. Qualitative analysis: Band diagram. Currents in the transistor. Ideal characteristics Ebers-Moll equations. The real transistor. Models of the BJT transistor.
THE MOSFET TRANSISTOR. Estrutura of the MOSFET. Band diagram. Capacity-tension characteristics. Modes of operation. Models of the MOSFET transistor.
Practical contents:
* Study of the properties of semiconductors.
* Analysis of the characteristics of PN junctions.
* Study of the MOS and MOSFET simulation tools.
Scenario 2 and / or 3
Without changes
Jasprit Singh, Dispositivos Semiconductores, Editorial McGraw-Hill, 1997.
G. W. Neudeck, El diodo PN de unión, 2; ediciónn, Addison-Wesley Iberoamericana, 1994.
G. W. Neudeck, El transistor bipolar de unión, 2; edición, Addison-Wesley Iberoamericana, 1994.
Kwok K. Ng, Complete Guide to Semiconductor Devices, Editorial Wiley, 2002.
M. Shur, Compound Semiconductor Electronics, Editorial World Scientific, 1996.
Peter Y. Yu, Fundamentals of Semiconductors, Editorial Springer, 2001.
R. F. Pierret, Fundamentos de semiconductores, 2 edición, Addison-Wesley Iberoamericana, 1994.
R. F. Pierret, Advanced semiconductor fundamentals, Addison-Wesley, 1987.
Sze, S.M., Physics of semiconductor devices, 2 edición, John Wiley & Sons, New York, 1981.
S. M. Sze, Semiconductor Devices, Editorial Wile, 2002.
Shalimova, Física de los semiconductores, Ed. MIR, 1975.
Yang, E.S., Fundamentals of semiconductor devices, McGraw-Hill Book Company, New York, 1978.
Wang, F.F.Y., Introduction to solid state electronics, North-Holland Pub. Company, Amsterdam, 1980.
Online documents:
http://pveducation.org/pvcdrom
http://ecee.colorado.edu/~bart/book/
In the Virtual Classroom, teaching material and links to online resources
5.5.1.5.1 BASIC AND GENERAL
CB1 - That students have demonstrated to possess and understand knowledge in an area of study that starts from the base of education
general secondary school, and is usually found at a level that, while supported by advanced textbooks, also includes some aspects that
they imply knowledge coming from the vanguard of their field of study.
CB2 - That students know how to apply their knowledge to their work or vocation in a professional manner and possess the skills that are usually
demonstrate by means of the elaboration and defense of arguments and the resolution of problems within their area of study.
CB3 - That students have the ability to gather and interpret relevant data (usually within their area of study) to issue
judgments that include a reflection on relevant social, scientific or ethical issues.
CG1 - Possess and understand the most important concepts, methods and results of the different branches of Physics, with a historical perspective of
its development
CG2 - Have the capacity to gather and interpret data, information and relevant results, obtain conclusions and issue reasoned reports in
scientific, technological or other problems that require the use of knowledge of Physics.
CG3 - Apply both the theoretical and practical knowledge acquired as well as the capacity for analysis and abstraction in the definition and approach
of problems and in the search of its solutions both in academic and professional contexts.
5.5.1.5.2 TRANSVERSAL
CT1 - Acquire analysis and synthesis capacity.
CT2 - Have the capacity for organization and planning.
CT5 - Develop critical reasoning.
5.5.1.5.3 SPECIFIC
CE1 - Have a good understanding of the most important physical theories, locating in their logical and mathematical structure, their support
experimental and the physical phenomenon that can be described through them.
CE2 - Be able to clearly handle orders of magnitude and make appropriate estimates in order to develop a clear perception of
situations that, although physically different, show some analogy, allowing the use of known solutions to new problems.
CE5 - Be able to perform the essentials of a process or situation and establish a working model of it, as well as perform the approximations
required in order to reduce the problem to a manageable level. He will demonstrate critical thinking to build physical models.
CE6 - Understand and master the use of mathematical and numerical methods most commonly used in Physics
CE8 - Be able to manage, search and use bibliography, as well as any source of relevant information and apply it to research works
and technical development of projects.
In-person and interactive classes with laboratory practices.
A course will be activated on the Virtual Campus.
Scenario 1
The general methodological indications established in the USC Degree Physics Memory will be followed. Classes will be face-to-face and the distribution of exhibition and interactive hours follows that specified in this document.
The tutorials may be face-to-face or telematic, if they are telematic they will require an appointment, which is also recommended for face-to-face.
Scenario 2
See Contingency Plan in the Observation section
Scenario 3
See Contingency Plan in the Observation section
There will be a final exam of the semester made up of theory and problems and it will be necessary to pass each part separately in order to pass this subject. This exam will count 70% of the final grade. Compulsory activities will be carried out (practices, problems, partial exams, etc.) that will count 30% of the final grade and that it is necessary to pass the subject. In case of not obtain a mark higher than 5 in any of the parts, the note will be that corresponding to the part not passed.
It is compulsory to do all lab lectures to pass the subject.
The student's grade in the second opportunity will correspond to the grade obtained in the corresponding official exam.
Students who did not attend the exam or underwent the evaluation of any other compulsory activity will obtain the grade of not presented.
For cases of fraudulent performance of exercises or tests, the one set forth in the Regulations for the evaluation of student academic performance and the review of grades will apply.
Contingency plan COVID-19- see comments below
PRESENTIAL WORK IN THE CLASSROOM
Hours
Blackboard hours in large group: 24
Hours of laboratory and small group interactions: 18
Tutorials in very small or individualized groups: 3
Other sessions with teacher
Specify:
Total hours classroom work in the classroom: 45
Additional personal work of the student: 67.5
Carry out a follow-up of material pola súa construtivo character taking advantage of seminary classes and practices.
Electromagnetismo I, II. Física del Estado Sólido. Mecánica Estatística.
The subject will be taught mainly in Spanish.
CONTIXENCE PLAN before a possible change of scenery
1) Objectives: unchanged
2) Contents: unchanged
3) Bibliographic material: unchanged
4) Competencies: unchanged
5) Methodology:
Scenario 2
The expository classes, keeping the official class schedule, synchronous (except asynchronously for special causes that will be communicated to the students in advance) using Teams or CV.
Laboratory and seminar interactive classes:
Part of the teaching will be carried out telematically:
If the measures adopted by the health authorities allow it, the exhibition classes will be carried out electronically and the interactive ones will be in person, respecting the official class schedule approved by the center.
If the limitation of capacity dictated by the health authorities does not allow all the students to attend the interactive face-to-face classes, you will be broadcast in streaming. Students will take turns attending face-to-face classes. The number of students per shift will be subject to the rules in force at all times.
Priority will be given when scheduling the subject activity in person in the assessment tests compared to the interactive classroom sessions. Due to the inevitable rotation of the students, the assessment tests consumed an unbearable number of hours, the corresponding teaching would be delivered telematically.
The tutorials may be face-to-face or telematic, require an appointment.
Scenario 3
Teaching will be telematic and classes will be held synchronously during official class time. It may be that, due to unsuccessful causes, some of the classes take place asynchronously, which will be communicated to the students in advance.
Tutorials will require an appointment
6) Evaluation system
Scenario 2 and 3
Assessment activities that cannot be carried out in person, if they cannot be delayed, will be carried out electronically through the institutional tools in Office 365 and Moodle. In this case, it will require the adoption of a series of measures that will require that the student have a device with a microphone and a camera while there is no well-equipped assessment software. Students can be called for an interview to comment or explain part or all of the test.
In cases of fraudulent performance of exercises or tests, the one set forth in the Regulations for the evaluation of the academic performance of students and the review of grades will be applied ”.
7) Study time and individual work: unchanged
8) Recommendations for the study of the subject: unchanged.
Antonio Jesus Garcia Loureiro
Coordinador/a- Department
- Electronics and Computing
- Area
- Electronics
- Phone
- 881816467
- antonio.garcia.loureiro [at] usc.es
- Category
- Professor: University Professor
Victor Manuel Brea Sanchez
- Department
- Electronics and Computing
- Area
- Electronics
- Phone
- 881816436
- victor.brea [at] usc.es
- Category
- Professor: University Lecturer
| Monday | |||
|---|---|---|---|
| 17:30-19:30 | Grupo /CLE_01 | Spanish | Main Hall |
| Tuesday | |||
| 17:30-19:30 | Grupo /CLE_02 | Spanish | Main Hall |
| Wednesday | |||
| 17:30-19:30 | Grupo /CLE_01 | Spanish | Main Hall |
| Thursday | |||
| 17:30-19:30 | Grupo /CLE_02 | Spanish | Main Hall |
| 06.01.2022 16:00-20:00 | Grupo /CLE_01 | Classroom 0 |
| 06.01.2022 16:00-20:00 | Grupo /CLE_01 | Classroom 130 |
| 06.01.2022 16:00-20:00 | Grupo /CLE_01 | Classroom 6 |
| 06.01.2022 16:00-20:00 | Grupo /CLE_01 | Classroom 830 |
| 07.08.2022 16:00-20:00 | Grupo /CLE_01 | Classroom 0 |
| 07.08.2022 16:00-20:00 | Grupo /CLE_01 | Classroom 6 |
| 07.08.2022 16:00-20:00 | Grupo /CLE_01 | Classroom 830 |