ECTS credits ECTS credits: 4.5
ECTS Hours Rules/Memories Student's work ECTS: 74.25 Hours of tutorials: 2.25 Expository Class: 18 Interactive Classroom: 18 Total: 112.5
Use languages Spanish, Galician
Type: Ordinary Degree Subject RD 1393/2007 - 822/2021
Departments: Soil Science and Agricultural Chemistry
Areas: Soil Science and Agricultural Chemistry
Center Higher Technical Engineering School
Call: First Semester
Teaching: With teaching
Enrolment: Enrollable
To acquire knowledge and abilities of the basic principles, properties and applications of Materials. The subject is concerned as a general introduction to materials technology, which is further developed in more specific courses of ceramics, metallurgy and polymers.
I.- INTRODUCTION.
Chapter 1.- Introduction.
1.1.- Materials and Civilization.
1.2.- Materials and engineering.
1.3.- Structure, properties and applications of materials.
1.4.- Classes of materials.
II.- THE ESTRUCTURE AND PROPIERTIES OF SOLIDS.
Chapter 2.- Atoms, chemical bonding and coordination.
2.1.- Atoms and Ions.
2.2.- Chemical bonding.
2.3.- Molecules.
2.4.- Coordination.
Chapter3.- Atomic order in solids.
3.1.- Crystals.
3.2.- Symmetry.
3.3.- Crystalline solids.
3.4.- Polymorphism and isomorphism.
3.5.- X-ray diffraction of crystals.
Chapter 4.- Atomic disorder in solids.
4.1.- Impurities in solids.
4.2.- Solid solutions.
4.3.- Dislocations and crystalline defects.
4.4.- Non-crystalline Materials.
Chapter 5.- Thermodynamics equilibrium.
5.1.- Introduction. Equilibrium.
5.2.- Equilibrium phase diagrams
5.3.- One-component systems
5.4.- Binary systems
5.5.- Ternary systems
Chapter 6.- Sintering
6.1.- Diffusion
6.2.- Solid reactions
6.3.- Sintering
6.4.- Processing of materials
6.5.- Microstructure
III.- MATERIALS PROPERTIES
Chapter 7.- Mechanical properties of solids
7.1.- Introduction.
7.2.- Elastic properties
7.3.- Fracture.
7.4.- Fracture in real solids
7.5.- Fracture statistics
Chapter 8.- Electrical, magnetic and optical properties of solids
8.1.- Conductivity of metals
8.2.- Dielectric properties
8.3.- Semiconductivity
8.4.- Superconductivity
8.5.- Magnetic properties of materials
8.6.- Piezoelectricity
8.7.- Optical properties of materials
IV.- CLASSES OF MATERIALS
Chapter 9.- Metals
9.1.- Metals and alloys
9.2.- Metals processing
9.3.- One and two-phases alloys
9.4.- Elastic deformation of metals
9.5.- Plastic deformation of metals
9.6.- Recrystallization
9.7.- Properties of polycrystalline metals
9.8.- Corrosion.
Chapter 10.- Polymers
10.1.- Big molecules
10.2.- Linear polymers
10.3.- Three-dimensional polymers
10.4.- Molecular structure
10.5.- Glass transition temperature
10.6.- Monomolecular crystals
10.7.- Deformation of polymers
10.8.- Processing of polymers
Chapter 11.- Ceramics
11.1.- Ceramic phases
11.2.- Classes of ceramics. Oxides, silicates and non-oxide ceramics
11.3.- Fracture of ceramics
11.4.- Processing of ceramic materials
11.5.- Advanced ceramics
11.6.- Refractories
Chapter 12.- Composites.
12.1.- Clases of composites
12.2.- Reinforced materials
12.3.- Mechanical properties. Fracture
12.4.- Reinforced process
12.5.- Multilayer materials
V.- MATERIALS SELECTION
Chapter 13.- Materials selection. Introduction.
13.1.- The design process
13.2.- Principles of selection
13.3.- Materials and shape
13.4.- Materials and processing
13.5.- Expert systems
13.6.- Examples of materials selection
VI.- EXAMPLES OF MATERIALS
Chapter 14.- Steel and cast iron
14.1.- The iron-carbon phase diagram
14.2.- Processing
14.3.- Properties
14.4.- Applications
Chapter 15.- Wood
15.1.- Structure and characteristics
15.2.- Properties
15.3.- Applications
Chapter 16.- Porcelain
16.1.- Diagram Al2O3-SiO2-K2O.
16.2.- Processing
16.3.- Properties
16.4.- Applications
Chapter 17.- Polyester/glass fibre
17.1.- Composition
17.2.- Processing
17.3.- Properties
17.4.- Applications
Bibliografía básica:
-CALLISTER, William D. Jr., 2016. Ciencia e ingeniería de materiales. 2ª edición. Barcelona: Reverté. ISBN 9788429172515 (BUSC: A QM 9 H)
-MONTES, J. M., F. G. CUEVAS, J. CINTAS, 2014. Ciencia e ingeniería de los materiales. 1ª ed. Madrid: Paraninfo. ISBN 9788428330176 (BUSC: A QM 10 A)
Bibliografía complementaria:
-Van Vlack: Elements of Materials Science and Engineering. 6ª Ed. Pearson. ISBN 978-0201093148
-BOLTON, William. Engineering Materials and Technology. 2ª Edition. Elsevier. ISBN 9781483141077
-ASHBY, M.F., et al., 2009. Engineering Materials and Processes Desk Reference . Elsevier
-SAJA, J.A. de, M.A. RODRIGUEZ, M. L. RODRIGUEZ, 2005. Materiales. Estructura propiedades y aplicaciones. Madrid: Thomson
http://www.grantadesign.com/education/resources/students.htm
-GAUKLER, L. J., 2009. Ceramic Materials In Energy Systems. Techna Group .
-COURT, S. A., 2008. The mapping of Materials supply chains in the UK`spower generation sector. MATERIALS UK ENERGY REVIEW. NAMTEC-UK.
-FOSSHEIM, K., A. SUDBO, 2004. Superconductivity: Physics and Applications. Wiley
-SEEBE, Bernd, 1998. Handbook of Applied superconductivity .Bristol: Institute of Physics
After completing the course the student will acquire skills related with:
ACADEMIC
1. Basic knowledge to understand the nature, properties and characteristics of materials.
2. Understanding the relationship between nature-processing-properties of Materials.
3. Basic knowledge of different types of materials, processing, properties and applications.
GENERAL
The course will improve the students skills to identify the relations between theoretical and practice problems typical of Materials Science. The course also will improve the ability to work in groups and to make technical reports.
BASIC AND GENERAL
CG3 - Knowledge in basic and technological subjects, which enables the students to learn new methods and theories, and gives them the versatility to adapt to new situations.
CG4 - Ability to solve problems with initiative, decision-making, creativity, critical reasoning and to communicate and transmit knowledge, skills and abilities in the field of industrial chemical engineering
TRANSVERSAL
TC1 - Analysis and synthesis capacity
CT6 - Troubleshooting
CT8 - Teamwork
CT19 - Autonomous learning
SPECIFIC
CI3 - Knowledge of the fundamentals of materials science, technology and chemistry. Understanding the relationship between microstructure, synthesis or processing and material properties
The course is structured on the basis of 30 hours of theoretical classes and 15 hours of practical seminars. The theoretical classes will be given in the classroom with the support of projections and the practical classes in seminars.
The students will carry out a work (maximum three students) related to a ceramic, metallic, polymeric or composite material, which will include a summary of the nature, preparation and properties of the material, its uses and its market. Competences: CG3, CG4, CT1, CT6, CT8, CT19 y CI3. The work will be delivered through the Learning Management System (LMS).
The assessment will be done through:
a) Written theoretical and practical test at the end of the term based on four or five short theoretical questions and two problems.
b) Qualification of the evaluating the work made during the course.
c) Continuous assessment in courses, seminars and visits to factories.
A mixed evaluation will be used, based on:
a) Grade obtained by the student in a final exam, consisting of one or two problems and four or five short questions. Grade: 70%. All problems and questions must be answered to a greater or lesser extent. In order to pass the exam, no problem or question must be left blank.
b) Grade obtained in the evaluation of the work done during the course (10%).
c) Continuous evaluation in seminars and theoretical classes (20%).
The qualification obtained in the points b and c above, can be kept for the second opportunity and will count with the exam mark for the final qualification.
The evaluation system for repeaters will be the same as that applied to non-repeaters.
In order to be evaluated, it is necessary to attend at least 50 % of the seminars, do the required work and take the final exam. This is the case both for passing the subject in the ordinary call and for recuperation
In the seminars, problems and case studies related to the contents of the subject will be presented, which are fundamental for a clear understanding and learning of the contents of the subject. Therefore it is mandatory to attend the seminars
Evaluation of competence Theoretical classes Tutorials Seminars Workshops Examination
CG3 :........................................X................X................X......................X
CG4..........................................X................X................X......................X
CT1..............................................................................X......................X..........X
CT6..............................................................................X..................................X
CT8..............................................................................X.......................X
CT19............................................................................X.......................X..........X
CI3...........................................X................X................X.......................X..........X
Qualification system % Minimum required
Seminars and lectures........ 20 Face-to-face
Work................................ 10 Learning Management System (LMS)
Exam................................70 4.0 Classroom
In the case of fraudulent exercises or tests, the provisions of the Regulations on the Evaluation of Students' Academic Performance and the Review of Grades shall apply.
Total student work time is estimated at around 112 hours, distributed as follows:
Attendance hours: 44
Hours of student work: 68.5
Related to the subject matter:
- Knowledge of general physics and general chemistry. - Knowledge of Mineralogy and Geology is desirable.
General:
Consistency throughout the course and attendance at classes and seminars.
Alvaro Gil Gonzalez
Coordinador/a- Department
- Soil Science and Agricultural Chemistry
- Area
- Soil Science and Agricultural Chemistry
- Phone
- 881816879
- Category
- Professor: University Lecturer
| Monday | |||
|---|---|---|---|
| 12:00-13:00 | Grupo /CLE_01 | Spanish | Classroom A2 |
| Tuesday | |||
| 12:00-13:00 | Grupo /CLE_01 | Spanish | Classroom A2 |
| 01.16.2023 16:00-20:45 | Grupo /CLIS_01 | Classroom A1 |
| 01.16.2023 16:00-20:45 | Grupo /CLE_01 | Classroom A1 |
| 01.16.2023 16:00-20:45 | Grupo /CLIS_02 | Classroom A1 |
| 06.22.2023 16:00-20:45 | Grupo /CLIS_02 | Classroom A2 |
| 06.22.2023 16:00-20:45 | Grupo /CLIS_01 | Classroom A2 |
| 06.22.2023 16:00-20:45 | Grupo /CLE_01 | Classroom A2 |